dri eaz 1200 dehumidifier manual

Dri-Eaz 1200 Dehumidifier Manual: Overview & Safety

Dri-Eaz 1200 dehumidifiers, alongside 2000 & 2400 models, require careful review of the owner’s manual, emphasizing electrical grounding for safe operation.

WARNING: Always read and save provided instructions to mitigate fire and electric shock hazards, ensuring proper unit grounding via a 3-prong plug.

Dri-Eaz Products, Inc. manuals (like 07-01486 A 04-04) detail crucial safety protocols for 115-volt units, including the 1200 model.

The Dri-Eaz 1200 is a widely utilized, portable dehumidifier designed for effective moisture removal in various settings, including restoration work and general humidity control. As a member of the DrizAir family – encompassing models like the 80, 2000 LG, and 2400 LG – it offers reliable performance in a compact form.

This manual provides essential operating instructions and safety guidelines specific to the 1200 model (and similar 115-volt units). Understanding its components, proper setup, and maintenance procedures, as outlined in documents like 07-00265 F 3-02, are crucial for optimal functionality and longevity.

Whether you’re addressing water damage or simply maintaining comfortable indoor air quality, the Dri-Eaz 1200, when used correctly, delivers efficient dehumidification; Refer to the complete owner’s manual for detailed information.

Important Safety Instructions

WARNING: Prioritize safety when operating the Dri-Eaz 1200. Always read and retain all provided instructions to prevent fire, electric shock, and potential equipment damage. Ensure the unit is correctly electrically grounded using a three-prong plug inserted directly into a matching grounded outlet.

Never operate the dehumidifier with a damaged power cord or plug. Disconnect the unit before cleaning or performing any maintenance. Avoid using extension cords, and if unavoidable, select one with adequate amperage.

Do not use the Dri-Eaz 1200 in areas containing flammable liquids or gases. Keep the unit away from water sources and ensure proper ventilation. Refer to manual 07-01486 A 04-04 for comprehensive safety guidelines.

Electrical Grounding Requirements

Crucially, the Dri-Eaz 1200 dehumidifier must be electrically grounded to minimize the risk of electric shock. This unit is designed for use with a grounded electrical outlet. The power cord includes a three-prong plug, which must be inserted directly into a matching grounded outlet.

Never remove or alter the grounding prong. Using an adapter to bypass grounding is dangerous and voids the warranty. Ensure the outlet is properly wired and grounded according to local electrical codes.

Refer to the owner’s manual (e.g., 07-01486 A 04-04) for detailed grounding instructions. Improper grounding can lead to serious injury or equipment failure. Always prioritize electrical safety when operating this device.

Understanding the Dri-Eaz 1200 Components

Dri-Eaz 1200 components include the dehumidifier unit itself, a drainage system for water removal, and a standard power cord with a three-prong plug.

Dehumidifier Unit Overview

The Dri-Eaz 1200 is a refrigerant dehumidifier designed for effective moisture removal in various environments. Its robust construction ensures durability, while its portable design allows for easy relocation to areas needing drying. The unit features a user-friendly control panel for adjusting humidity settings and operating modes.

Internally, the 1200 utilizes a refrigeration coil to condense moisture from the air. This condensed water is then collected and directed to the drainage system. The unit’s airflow system efficiently draws in moist air and expels dry air, creating a comfortable and controlled environment. Regular inspection of the unit’s exterior and internal components is recommended for optimal performance and longevity, as outlined in the owner’s manual.

Understanding the basic layout and function of these core components is essential for effective operation and maintenance of the Dri-Eaz 1200.

Drainage System Location & Connection

The Dri-Eaz 1200 dehumidifier’s drainage system is crucial for continuous operation, preventing manual emptying. Locate the drainage outlet, typically found on the unit’s rear or side panel. Connection requires a suitable plastic drainage hose, compatible with the outlet’s diameter.

Ensure a secure connection to prevent leaks and maintain efficient water removal. The hose should lead to a floor drain or a designated collection container. For models utilizing a pump, like the Evolution LGR, proper hose attachment is vital for functionality.

Regularly inspect the hose for kinks or blockages, which can impede drainage. Refer to the manual for specific connection instructions and recommended hose types to ensure optimal performance of the Dri-Eaz 1200’s drainage system.

Power Cord and Plug Specifications

The Dri-Eaz 1200 dehumidifier utilizes a standard power cord and plug configuration, typically designed for 115-volt operation. Important: the manual emphasizes the necessity of a grounded, 3-prong plug for safety, preventing electrical shock hazards.

Verify your power outlet matches these specifications before connecting the unit. Avoid using extension cords whenever possible; if required, ensure it’s a heavy-duty cord rated for the dehumidifier’s amperage.

Damage to the power cord or plug renders the unit unsafe and requires immediate repair or replacement by a qualified technician. Always disconnect the unit from the power source before inspecting or handling the cord. Refer to the manual for specific amperage and voltage details for your Dri-Eaz 1200 model.

Operating the Dri-Eaz 1200

Dri-Eaz 1200 operation involves proper placement, ensuring adequate airflow around the unit, and connecting to a suitable drainage system for efficient moisture removal.

Start and stop the dehumidifier according to manual instructions, adjusting humidity control settings for desired dryness levels.

Initial Setup and Placement

Initial setup of the Dri-Eaz 1200 requires careful consideration of the surrounding environment. Before operation, ensure the unit is placed on a level surface, allowing for adequate ventilation around all sides – avoid obstructions that could impede airflow.

Locate the dehumidifier in the central area of the space needing drying, away from direct sunlight or heat sources. Connect the drainage system, utilizing a plastic drainage hose, as detailed in the owner’s manual.

Proper placement is crucial for optimal performance; consider using Dri-Eaz TurboDryer airmovers in conjunction with the 1200 for enhanced drying results. Always refer to the manual for specific guidelines regarding placement in different environments.

Starting and Stopping the Dehumidifier

To begin operation of your Dri-Eaz 1200, first, confirm the unit is correctly plugged into a grounded electrical outlet. Ensure the drainage hose is securely connected to prevent water overflow. Turn the dehumidifier on using the power switch, and select your desired humidity control setting.

Allow several minutes for the unit to reach optimal operating conditions. To stop the dehumidifier, simply switch the power off. Always disconnect the unit from the power source before performing any maintenance or cleaning procedures.

Refer to the owner’s manual for detailed instructions and safety precautions regarding starting and stopping the 1200 model, ensuring safe and efficient operation.

Humidity Control Settings

The Dri-Eaz 1200 dehumidifier offers adjustable humidity control settings, allowing you to tailor operation to specific needs. These settings typically range from continuous operation to specific percentage levels, influencing the unit’s runtime and energy consumption.

Lower humidity settings promote faster moisture removal, ideal for severe water damage restoration. Higher settings conserve energy while maintaining acceptable humidity levels in less demanding environments.

Consult the owner’s manual for precise details on interpreting the humidity control scale and selecting the optimal setting for your application; Proper adjustment ensures efficient and effective dehumidification;

Maintenance and Troubleshooting

Dri-Eaz 1200 maintenance involves regular filter cleaning/replacement and coil procedures, addressing common issues detailed in the owner’s manual for optimal performance.

Filter Cleaning and Replacement

Maintaining a clean air filter is crucial for the Dri-Eaz 1200’s efficiency and longevity. Regularly inspect the filter for dust and debris accumulation; a clogged filter restricts airflow, reducing dehumidification capacity and potentially causing the unit to overheat.

The owner’s manual provides specific instructions on filter access and removal. Typically, the filter is located behind a removable access panel. Cleaning can often be achieved by vacuuming the filter gently, or washing it with mild soap and water, ensuring it is completely dry before reinstallation.

Replacement is necessary when the filter becomes damaged or excessively dirty. Dri-Eaz recommends using genuine replacement filters to ensure proper fit and performance. Refer to the manual for the correct filter part number. Frequent filter checks, especially in dusty environments, will maximize the dehumidifier’s effectiveness.

Coil Cleaning Procedures

Maintaining clean coils is vital for optimal performance of your Dri-Eaz 1200 dehumidifier. Over time, dust and contaminants accumulate on the evaporator and condenser coils, hindering heat transfer and reducing dehumidification efficiency. The owner’s manual details specific coil cleaning procedures.

Before cleaning, always disconnect the unit from the power source. Use a specialized coil cleaner designed for refrigeration systems, following the manufacturer’s instructions carefully. Apply the cleaner to the coils and allow it to sit for the recommended time, then gently brush away any loosened debris.

Rinse the coils with clean water, ensuring no cleaner residue remains. Thoroughly dry the coils before reassembling the unit. Regular coil cleaning, typically annually, will help maintain peak performance and extend the lifespan of your Dri-Eaz dehumidifier.

Common Issues and Solutions

Troubleshooting your Dri-Eaz 1200 dehumidifier is often straightforward. If the unit isn’t dehumidifying, check the air filter for blockage – a common cause. Ensure the drainage system is clear and unobstructed, as a full reservoir will halt operation. Verify the humidity control settings are appropriately adjusted for your desired level.

If the unit is making unusual noises, inspect for loose components or debris within the fan housing. Electrical issues should be addressed by a qualified technician; never attempt self-repair. Refer to the owner’s manual for detailed diagnostic steps and safety precautions.

Consistent issues may indicate a need for professional servicing. Maintaining proper airflow and regular cleaning can prevent many common problems, extending the unit’s lifespan.

Technical Specifications

The Dri-Eaz 1200 operates on standard 115-volt power, offering significant dehumidification capacity for its physical dimensions and manageable weight.

Specific airflow rates and precise dehumidification figures are detailed within the official Dri-Eaz product documentation and owner’s manual.

Voltage and Power Requirements

Dri-Eaz 1200 dehumidifiers are primarily designed for operation on a standard 115-volt electrical supply, commonly found in most North American households and commercial settings.

It is crucial to verify that the power source matches the unit’s voltage requirement before connecting the dehumidifier to prevent damage or safety hazards.

The manual emphasizes the necessity of a properly grounded outlet for all Dri-Eaz 115-volt models, including the 1200, to ensure user safety and optimal performance.

Avoid using extension cords whenever possible; if one is absolutely necessary, it must be a heavy-duty cord rated for the dehumidifier’s amperage draw.

Refer to the unit’s nameplate and the owner’s manual (07-01486 A 04-04) for precise power consumption details and specific electrical specifications.

Airflow and Dehumidification Capacity

The Dri-Eaz 1200 dehumidifier is engineered to efficiently remove moisture from the air, boasting a substantial dehumidification capacity suitable for various restoration and maintenance applications.

While specific airflow (measured in Cubic Feet per Minute ー CFM) and pints-per-day removal rates vary, the 1200 model is designed for moderate-sized spaces.

Optimal performance is achieved when the unit is positioned to allow unobstructed airflow, maximizing its ability to draw in humid air and expel dry air.

Combining the 1200 with Dri-Eaz TurboDryer airmovers enhances overall drying effectiveness by promoting air circulation.

Consult the owner’s manual for detailed specifications regarding airflow rates and dehumidification capacity under different operating conditions.

Physical Dimensions and Weight

Understanding the Dri-Eaz 1200’s physical characteristics is crucial for transportation, placement, and storage considerations. The unit is designed for portability, yet maintains a robust build quality.

While precise dimensions are detailed in the owner’s manual (refer to model DZ1200 SP, F203-SP), the 1200 is generally compact enough for maneuvering in various job site environments.

Its weight, while substantial due to internal components, allows for manageable relocation by one or two individuals.

Consider the available space and floor load capacity when positioning the dehumidifier, ensuring stable and secure operation.

Reviewing the manual’s specifications will provide exact height, width, depth, and weight measurements for accurate planning.

Warranty Information

Dri-Eaz provides warranty coverage details for the 1200, outlining specific terms, duration, and limitations; review the manual for claim procedures.

Understanding coverage ensures proper protection against potential defects in materials or workmanship, as defined by Dri-Eaz Products, Inc.

Coverage Details

Dri-Eaz warranty coverage for the 1200 dehumidifier, and related models like the 2000 and 2400, typically addresses defects in materials and workmanship under normal use. The specific duration of coverage varies, often starting from the original date of purchase. It’s crucial to retain proof of purchase for warranty validation.

Generally, the warranty covers component failures affecting the dehumidifier’s core functionality. However, it usually excludes damage resulting from misuse, neglect, improper maintenance, or unauthorized repairs. Consumable parts, such as filters, are typically not covered. The warranty is valid only for the original purchaser and is non-transferable.

Reviewing the complete warranty documentation included with your Dri-Eaz 1200 is essential to understand the precise scope of coverage and any associated limitations. This ensures a smooth claim process should any issues arise during the warranty period.

Claim Procedures

To initiate a warranty claim for your Dri-Eaz 1200 dehumidifier, first contact Dri-Eaz Product Support directly. You’ll need to provide proof of purchase, including the date and location of the original transaction, along with a detailed description of the defect or issue. Serial number of the unit is also required.

Dri-Eaz may request photos or videos documenting the problem to aid in the assessment. They might also ask you to perform basic troubleshooting steps. If the issue is determined to be covered under warranty, Dri-Eaz will provide instructions for returning the unit or arranging for authorized repair.

All shipping costs for warranty claims are typically the responsibility of the customer, unless otherwise specified by Dri-Eaz. Ensure the unit is securely packaged to prevent further damage during transit. Retain tracking information for your records.

Dri-Eaz Product Support

Dri-Eaz offers comprehensive support via phone (800-932-3030), fax (360-757-7950), and their website, providing manuals and resources for the 1200.

Access online manuals, troubleshooting guides, and FAQs to resolve issues quickly, ensuring optimal performance of your Dri-Eaz dehumidifier.

Contact Information

Dri-Eaz Products, Inc. provides multiple avenues for customer support regarding the 1200 dehumidifier and other models. For direct assistance, you can reach their customer service department by phone at 800-932-3030 during regular business hours. Alternatively, fax inquiries can be sent to 360-757-7950.

Their physical address is 15180 Josh Wilson Road, Burlington, WA 98233, USA. However, for the quickest and most comprehensive support, visiting their official website, www.dri-eaz.com, is highly recommended.

The website hosts a vast library of resources, including downloadable manuals (like 07-01486 A 04-04), troubleshooting guides, frequently asked questions, and parts diagrams. These online resources often provide immediate solutions to common issues, eliminating the need for a phone call or fax.

Dri-Eaz is committed to ensuring customer satisfaction and offers dedicated support to help you maximize the performance and longevity of your equipment.

Online Resources and Manuals

Dri-Eaz’s website, www.dri-eaz.com, serves as a central hub for accessing comprehensive resources related to the 1200 dehumidifier and other products. Users can readily download owner’s manuals, such as version 07-01486 A 04-04, in PDF format for convenient offline access. These manuals detail crucial safety instructions, operating procedures, and maintenance schedules.

Beyond the core manual, the site offers troubleshooting guides to address common issues, parts diagrams for easy component identification, and frequently asked questions (FAQs) providing quick answers to prevalent concerns.

Furthermore, Dri-Eaz provides access to user guides, like the DRI-EAZ DRI-104677 DrizAir 1200 Classic Refrigerant Dehumidifier User Guide, enhancing understanding of specific features. These digital resources empower users to self-resolve issues and optimize dehumidifier performance, ensuring efficient and reliable operation.